Destruction
What to do with a hard drive or SSD that won't work
A failed drive can't be wiped, but its data is often still recoverable. How to check whether it's really dead, then destroy hard drives and SSDs safely and in proportion to the risk.
A drive that no longer works still holds data. When a hard drive fails, it's usually the motor, the read heads or the circuit board that has given up, and the platters can still carry everything that was on them. Data recovery companies get data back from drives like this every day. SSDs are similar: if the controller fails, the data is still sitting in the memory chips.
So a dead drive needs at least as much care as a working one, and arguably more, because you can't simply wipe it.
Step 1: make sure it's really dead
Before you reach for the punch, try the drive in a USB dock or adaptor, or in another computer. Drives that fail inside one machine sometimes work in another. If it's detected, wipe it properly first, using the drive's Secure Erase or sanitise command where possible, then decide whether to reuse it or destroy it. A wiped drive that you then destroy is the strongest combination.
A standalone eraser that doubles as a USB dock covers both jobs:
StarTech.com Drive erasers
Single-Bay SATA Drive Eraser (SDOCK1EU3P2)
Best for Offline erasing of single SATA drives, with a printed record
A compact standalone eraser for 2.5" and 3.5" SATA hard drives and SSDs that can print a record of each erase. It also works as a USB 3.0 SATA dock.
- Secure Erase and Enhanced Secure Erase (NIST SP 800-88 Rev 1 Clear/Purge)
- Cryptographic Erase plus 1/3/7-pass overwrite
- RS232 port for printing erase records
- 4Kn drive compatible
Step 2: destroy it in proportion to the risk
Hard drives
A punch or hydraulic crusher bends the platters and wrecks the drive, which gives you visible proof and stops it being reused. Be clear about what it does and doesn't do, though: NIST notes that bending or drilling a drive may only partly damage it, leaving some areas readable with laboratory techniques. For personal data on a home drive, that's usually a reasonable level of protection. For business data, you'll want more.
Shredding gives more certainty, as long as the particle size suits the data. Our guide explains the DIN 66399 security levels shredders are rated against.
DupliM Punches
HDD Demolisher Hard Drive Crusher
Best for Power-free, on-site destruction of small batches of hard drives
A hand-pumped hydraulic crusher that breaks the drive casing and deforms the platters, with no power supply needed. The crushing chamber is fully enclosed.
For hard drives, not SSDs. No DIN 66399 level is stated, so wipe sensitive drives first.
- Manual hydraulic pump, no power needed
- Takes 3.5" and 2.5" hard drives, up to two at a time
- Breaks the casing and deforms the platters
- Fully enclosed for safety
HSM Shredders
Powerline HDS 150 Hard Drive Shredder
Best for In-house electric shredding of hard drives
A floor-standing industrial shredder from German maker HSM that cuts hard drives into 40mm strips. The listing says it also takes CDs, floppy disks, cards and USB memory sticks.
E-2 means electronic media is only divided, so SSD chips can survive. Check HSM's own spec sheet for size, weight and power before ordering.
- 40mm strip cut
- Security levels H-3 / E-2 / T-1 stated on the listing
- Also takes optical media, cards and USB sticks (per listing)
- HSM part number 1772111
SSDs, M.2 drives and other flash storage
SSDs keep data in small memory chips, so methods designed for hard drives can miss it entirely. A punch can go straight through the circuit board between the chips, and a shredder rated only for hard drives can leave chips intact. To destroy an SSD you need to break every memory chip: check a shredder's rating for electronic media (the "E" levels), not just hard drives, or use a destruction service.
High-risk data, or lots of drives
Use a certified destruction company. The NCSC suggests looking for recognised certification such as its own CAS-S scheme or ADISA. Ask for a certificate that lists serial numbers and check it against what you sent, or watch the destruction happen on site.
Stay safe
- Many 2.5-inch laptop drives have glass platters that shatter into sharp fragments. Use an enclosed crusher, and don't hit drives with a hammer.
- Wear eye protection and cut-resistant gloves when opening, punching or handling destroyed drives.
3M Accessories
SecureFit SF401AF Safety Glasses
Best for Eye protection when punching, crushing or shredding
Anti-scratch, anti-fog safety glasses with 3M's pressure-diffusion arms for comfortable wear during long sessions.
- Anti-scratch and anti-fog lenses
- Pressure Diffusion Technology arms
- Single pair
Ansell Accessories
HyFlex 11-561 Cut-Resistant Gloves (L, 12 pairs)
Best for Handling sharp drive fragments and opened chassis
Lightweight nitrile-coated work gloves with an ISO cut level C rating, for handling opened drives and sharp fragments. This listing is size L, 12 pairs.
- ISO cut level C (per listing)
- Thin FORTIX nitrile coating for grip
- Reinforced thumb crotch
- Other sizes are separate listings
Step 3: keep failed drives secure until they're destroyed
Failed drives tend to pile up in a drawer. Store them somewhere locked, bag them in numbered, tamper-evident bags, and keep a simple log of serial numbers, where each drive came from and what happened to it. Our guide has a checklist of what to record. A lockable drive case and numbered security bags make this easy: Dpofirs 10-bay lockable drive case and tamper-evident security bags.
Under warranty? Think twice before sending a failed drive that held sensitive data back to the manufacturer for a replacement. Some business support contracts include a "keep your drive" option for exactly this reason.
Sources
- NIST, SP 800-88 Rev. 2, Guidelines for Media Sanitization (September 2025)
- NCSC, Secure sanitisation and disposal of storage media