Flash media
USB sticks and memory cards: how to wipe or destroy flash media
Why deleting or formatting a USB stick or SD card isn't enough, what overwriting can and can't do on flash memory, and how to handle them by risk, from reuse to destruction.
Most offices, and most homes, have a drawer of old USB sticks and memory cards, plus more hiding in cameras, dashcams, drones, sat navs and old phones. They're small and cheap, so they're easy to forget about. Yet they often hold photos, scanned documents and backups.
Why flash memory is different
A USB stick, SD card or SSD doesn't store data where your computer thinks it does. A controller inside spreads writes across the memory chips to stop any part wearing out (wear levelling), and keeps spare capacity hidden in reserve. NIST's media sanitisation guidelines point out that, as a result, overwriting through the normal interface can't be relied on to reach every old copy of your data.
A quick format is worse still: it just resets the file system, and the data stays where it was.
Choose a method by risk
Low risk, and the stick or card is staying in use
For example, reusing camera cards or handing USB sticks round the office. A full overwrite of the whole device is a sensible, proportionate step. NIST calls this level "clear": it protects against simple recovery tools. In Windows, a full format (with "Quick Format" unticked) overwrites the volume. If you handle sticks or cards in batches, a standalone duplicator and eraser saves a lot of time:
StarTech.com SSD & flash
1:5 USB Flash Drive Duplicator & Eraser
Best for Wiping batches of USB sticks before reuse or disposal
Wipes or copies USB sticks and USB storage in batches without a computer, and can scan drives for errors and bad sectors.
Its overwrite modes are a NIST "clear", not a "purge".
- 1-to-5 standalone USB duplicator and eraser
- USB 3.0/2.0 flash drives and USB storage
- Quick, single-pass and 3-pass overwrite (NIST Clear / DoD)
- LCD menu with error scanning
U-Reach SSD & flash
SD924G SD/microSD Copier & Eraser (1:23)
Best for High-volume SD and microSD card sanitisation
A production-scale unit that copies to, or erases, up to 23 SD or microSD cards at once, with replaceable socket modules.
- Standalone 1:23 SD/microSD duplicator and eraser
- Quick, Full or DoD erase
- Bit-by-bit copy for all formats
- Modular, replaceable sockets
Sensitive data, or the media is leaving your control
Destroy it. Cards and sticks contain tiny memory chips, so destruction has to be fine enough to break every chip. Under DIN 66399, electronic media has its own "E" security levels with much smaller particle sizes than those for hard drives (see our explanation of the levels). Check that a shredder accepts the media you have and is rated to a suitable E level, or use a certified destruction service.
M.2 and SATA SSDs
Unlike USB sticks and memory cards, SSDs have built-in sanitise commands (Secure Erase, sanitise and cryptographic erase) that are designed to reach the hidden areas too. Use a tool or eraser that supports them, rather than overwriting. See our SSD and M.2 erasers.
Prevention: encrypt from day one
The easiest flash media to dispose of is media that only ever held encrypted data. BitLocker To Go (on Windows Pro editions) or a hardware-encrypted USB drive means that a lost or discarded stick holds nothing but scrambled data. For organisations, encrypting removable media also turns a potential data breach into a minor inconvenience.
Don't forget the devices. Before passing on a camera, dashcam, drone or old phone, take the memory card out and deal with it separately. Small devices with built-in storage need a factory reset too.
Sources
- NIST, SP 800-88 Rev. 2, Guidelines for Media Sanitization (September 2025)
- NCSC, Secure sanitisation and disposal of storage media